7165 Grinder Mixer
New Grinder Mixer Features
- Hydraulic Cooler
- Tube Style feed auger
- Increased PTO shaft and bearing
- Centralized Grease Point
- LED lights and nonslip ladder
- 165 bu. (206-cu. ft.) Mixing Tank
- 10 in. Diameter Discharge Auger
- 100 in. Auger Feeder
- 96 Hammers
- 26 in. Wide Mill
More About 7165 Grinder Mixer
It’s not just the largest in the industry, it is also the best and most productive grinder on the market today. The portable 7165 grinder mixer from Art’s Way features a gigantic 165-bushel tank with a one-piece 26-inch hammermill. This 4-ton mixer is easily configured to meet the needs of your specific livestock operations, and includes a multitude of new ideas and improvements that originated from the experience of owners of previous models.
More consistent feeding
A hydraulic cooler has been added to prevent overheating for more consistent and longer run times. This has been combined with a smaller hydraulic fluid tank for faster warm up times and more economical fluid changes.
A tube style auger feeder prevents back flow of feed for more consistent feed.
Double flighting into the transition auger provides a more even flow to the discharge.
The 7165 grinder mixer boasts a fully self-contained hydraulic system operated by a wireless remote to control: raise/lower and swing of the discharge auger; open/close of the tank discharge gate; plus start and stop operation of the unload system.
*Tractor operated hydraulics are also available.
High Performance Capabilities
This hydraulic cooler automatically engages when needed and remains off when not in use.
This allows you to grind and mix more consistently for longer periods of time.
The tube style creates more even flow of feed and prevents back feed spillage down the auger.
Tank and Frame
Tank capacity (206 cu. ft.) 165 bu.
Height (with tire size) 126 in.
Width with auger feeder 114 in.
Overall length 175 in.
Auger diameter 9 3/16 in.
Auger tube diameter 10 in.
Horizontal operating arc 225
Vertical operating arc +46º to -27º or 60 to -11º
Auger length 100 in.
Auger diameter 10 in.
Auger width 12 in.
Mixing base 24 in.
Auger diameter 7 in.
Hopper size 21 in. x 24 in.
Reversible hammers 96
Width of mill Full 26 in.
Screen area 780 sq. in.
Operating speed 540 or 1000 rpm
Operating speed of mill 2800 to 3000 rpm
Screen sizes available 1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1, 1 1/4, 1 1/2, and 2 in.
Type drive 6 double banded 3V belts for 540 or 1000 rpm
Use your Operator’s manual or Parts list for quick reference.
*Manual Coming Soon
You can count on your local dealer for parts and service attention.
Our Parts and Service department is also available via phone, fax or email.