9016BT High Dump Cart

Features

High Dump Cart designed to speed up harvest
  • Walking Tandem Design
prevents damage to unlifted beets
  • Reduces Downtime
  • Improved Efficiency
  • Ruggedly Built to Last
See All Product Features

Specifications

  • 20 ton Capacity
  • 15 in. wide Tires Centered on 132 in.
  • 20 in. Axle Clearance
See All Product Specifications

More About 9016BT High Dump Cart

9016-BT High Dump Cart designed to boost efficiency during the beet harvest.

Sugar Beet High Dump CartThe 9016-BT wheel base is set so the tires can run through the field without damaging unlifted beets.  The 15-inch wide tires, centered on 132 inches, straddle six rows of beets.  The cart features a large, 20-ton capacity and can be easily set to dump to the left or right side.  When combined, these features allow the 9016-BT to be pulled alongside the harvester when opening and dump back to the left when full.  This allows the harvester to run at a much more continuous pace, greatly reducing the amount of lost time.

The walking tandem is designed with 20 degree of total rotation for smooth transport over uneven terrain.  The cart is available with a scale system that includes a Wi-Fi antenna.  The Wi-Fi antenna allows the harvester operator to instantly monitor the load from any smart device.  This feature is very helpful when trying to maximize truck loads.

In addition to sugar beets, the high dump cart can also be used for edible beans, peanuts, forage, cotton, corn and soybeans.

Walking tandem design reduces downtime.
Easily converts to LH or RH dump.
Impressive capacities
Wide stance stability
Slaved cylinder elevator raises loads evenly
Scale system is standard equipment
Rugged all-steel construction

Specifications


Length of box:
 16 ft.

Capacity struck:  930 cu. ft.

Rated load capacity:  40,000 lbs.

Lip clearance: 7-13 ft.

Pivot height:  9-15 ft.

Axle clearance: 20 in.

Height (low side):  11 ft.
Height (high side):  12 ft. 4 in.

Tread width:  132 in.

Lift cylinders: 5 in. and 4 in. Master Slave
Tilt cylinders: 4 in. parallel

Recommended min. flow: 15 GPM
Dump cycle time @ 15 GPM: Approx. 90 sec
Dump cycle time @ 20 GPM: Approx. 20 sec

 

Use your Operator’s manual or Part’s manual for quick reference.

You can count on your local dealer for parts and service attention,

Our Parts and Service department is also available via phone, fax or email.
Phone: 712-864-3131
Fax: 712-864-3515
Email:
service@artsway-mfg.com
parts@artsway-mfg.com


Art's Way Ag