High Dump Cart

Reaching higher levels of productivity

Big acreage operators are continually discovering new ways to cope with short harvest windows. With Miller Pro Dump Boxes, you can experience virtually nonstop, high volume harvesting. Because of their capacity, high lift and short cycle time, they’ll help you bring in higher quality forage faster. You will also save money by not having extra transport vehicles with drivers waiting in the field.

Higher lift and better reach

Reach over and into receiver boxes and trucks with dump heights at pivot from 11 ft. 9 inches for the 9015 model. An optional riser kit increases the pivot point 6 inches for the 9015. As the boxes begin their lift, they also side shift to move closer to the receiving vehicle.

4 wheel wagon models

Hayfields can be anything but perfectly flat. Stability is critical to favorable dump box operation. Miller Pro Dump Boxes have massive undercarriages, a wide stance and counterweight box. They flex when needed, and become rigid during the dumping cycle. They have automotive design steering and a tight turning radius to follow big self-propelled choppers.

Ball joint steering and short turning radius
  • Automotive ball joint steering along with C-channel reach provide improved towing and long-lasting wear ability.
  • Tight 57 inch turning radius easily follows severe chopper turns
  • Massive spindles with 8 bolt hubs easily handle heavy loads and rough terrain
  • Heavy duty tire options
  • Telescoping pole with easy-lift spring
  • Red and amber transport lights plus SMV sign and reflective decals are standard
Wide stance stability
  • Tread width up to 10 ft.
  • Counter weight for maximum stability.

2 wheel cart models

2 wheel wagon

The 9015 and 9016 Dump Boxes are available with 2 wheel cart chassis. Ideal for wet fields. Rugged understructure rolls through tough conditions.

  • Reversible hitch for left or right side dump
  • Axles adjust fore and aft for best weight distribution
  • Massive 4 1/2 inch bolt-in cold rolled spindles with heavy duty 10 bolt hubs with studs and nuts
  • Model 9015 uses 18 in. wide x 38 in. diameter rims for use with 20.8 x 38 in. 14 ply bias tires
  • Swivel hitch clevis adjustable up and down
  • 9015 high strength hitch tube incorporates a 7000 lb. “crank style” jack
  • Weigh scale system is optional
Rugged all-steel construction
  • Smooth steel box sides reinforced with internal bracing
  • High-strength heavy duty construction throughout
  • Large capacity hydraulics with 5 inch master and 4 inch slave cylinders (9016 has 4 inch tilt cylinders)
  • Massive greaseable hinges (box to elevator) for added strength Heavy duty running gear designed for high load capacity
Impressive Capacities
Model 9015 comes with a 15 ft. box length with a capacity of 950 cu. ft. with roof. Lift and dump up to 24,000 lbs.
Slaved cylinder elevator raises loads evenly…requiring less oil
slaved cylinder elevatorForage choppers naturally load dump boxes heavier to the rear. Miller Pro Dump Boxes feature master and slave cylinders to raise their loads uniformly without need for straightening cables and pulleys. With this system, the large 5 inch master and 4 inch slave cylinders require less oil. Hydraulic valve mechanically locks oil in stabilizer cylinder(s) when dump box is elevated (4 wheel only).
Advanced elevator lockout system
advanced elevator lockoutOn models with rocking bolsters, as the box begins to lift, stabilizer cylinder(s) lock out the rocking bolster to prevent its movement. On the 9015, as the box begins its dump rotation, spring loaded latches lock the slide tubes. The design incorporates a backup secondary lock. Spring loaded latches include primary and secondary backup lock as the box rotates for dump.
Faster cycle time lets choppers spend more time chopping
faster cycle timeBecause this highly efficient elevator lift design requires less oil, it creates a faster time cycle of just 1 to 1 1/2 minutes (depending on harvesting unit hydraulics).
Easier dumping
easier dumpingExtended pouring lip, a 46-47 inch dumping angle and smooth steel sides helps material slide out of the box and into the center of the receiver. Left side dumping is standard. Right hand dumping is optional on most models.
Automatic opening roof
automatic opening roofThe opens and closes automatically when the box tilts. The steel mesh roof panels let air out, and light in to see load level. Fill opening is wide and high.

Specifications

Models
  • 9015 4 Wheel Wagon
  • 9015 2 Wheel Cart
  • 9016 4 Wheel Wagon
  • 9016 2 Wheel Cart
High Dump Cart
9015/9016 High Dump Brochure

High Dump Cart Brochure Cover

9015/9016 High Dump Cart Manual and Parts List

 

Contact Art’s Way Sales Team with any questions at 712.864.3131.

Customers are saying…

“Experience.”

-Name, State

“Experience.”

-Name, State

Check out our NEW Commercial Forage Box!