Rear Steer Pull Type Land Grader
- Rear Steer Guidance
- In Sight Guidance Markers
- Short Turning Radius
- Fast Cycle Times
- Optimum Operator Control from the Tractor Seat
- Combination Single/Double Hitch
- 9, 12, 14 and 16 ft. Models
- Tractor Range 40-220 HP
- 43 degree Blade Angle
- 15 degree Blade Tilt
More About Rear Steer Pull Type Land Grader
Rear steer provides up to 5 feet offset, giving you room to work
Using hydraulic cylinders operated from your tractor, you can position the blade up to 5 feet to the right or the left. This makes it easy for you to maneuver around tight areas along fence lines, buildings, trees and other obstacles you might encounter. Steer clear of the slippery surfaces of drainage ditches, irrigation ponds and other waterways by offsetting your grader and keeping your tractor on safe dry ground.
Push a lot of dirt with maximum capacity blade
With 15 in. ground clearance and 30 in. blade height, you can do a lot of work in a short period of time. Reinforced on the back of the blade with industrial steel cross beams, the blade is built structurally strong. Angled reinforcement beam at the cutting edge keeps the cutting edge straight. Made of heat treated, high carbon steel gives the cutting blade longer life before replacing.
Designed for smooth performance
High curved blade reduces drag and maximizes dirt transfer. Use with or without the scraper ends for maximum control of flow. Blade tilts up to 15 degrees for slope cuts and with 43 degrees of angle, the blade swings wide increasing working range.
Variety of sizes available
With this attachment, you can tackle most any grading operation.
- 9, 12, 14 and 16 ft. models
- Tractor range 40-220 HP
- Weight box standard with each model
- All cylinders and hoses included
- Storage parking jack
- Replaces the need for 3 pt. scraper